Lattice Plate Chargers Perfect for a Spring Garden Wedding Reception

These Lattice Plate Chargers are Perfect For a Spring Garden Wedding Reception. You can make these simple wedding reception plate chargers in no time and customize them in any color that will match your wedding color scheme.

If you are having a large spring wedding then use these simple lattice plate chargers as a wedding favor for each of your wedding guests. If you are inviting your guests in couples, then each will have a pair of custom lattice plate chargers to use for years to come!

This simple wood working craft project is a great way to use up some old lattice or lattice leftover from another project around the house. You can buy lattice at almost any home improvement store.

To Make This Lattice Plate Chargers Perfect For a Spring Garden Wedding Reception You Will Need

Lattice woodwork

Picture Frame Molding

Primer

Latex paint that matches your wedding colors

Clear acrylic paint

Jigsaw

Tape Measure

Pencil

2 2-inch paint brushes

The first step is to cut out your Lattice Plate Charger shape from the lattice woodwork.

Use your tape measure and simply trace out a rectangle in the lattice to the size you need. Trace it on there with a marker or pencil. A good plate charger should be about 2 to 3 inches wider than your diner plate so you can easily see it.

Now, use your jigsaw to cut the rectangular shape out. Stick to a simple rectangle or square because paint and embellishments will add the details to this Spring Garden Wedding Reception craft project.

Now, once any glue has dried go ahead and prime out your entire piece of artwork in primer. I like to use a small 2-inch paintbrush so I can paint all the small areas in the lattice woodwork.

Now, let the primer dry.

Paint the Lattice Plate Chargers with the purple, pink, or white. Use any color that will carry on your wedding scheme colors into your wedding reception dinner table.

Now, let all of this paint dry.

Now, use the tape measure to measure how long each side of your Lattice Plate Chargers are. Cut your 2-inch wide ribbon to this length. Use the hot glue to attach the ribbon the edge of the lattice.