Vintage Chenille Blanket Lampshade Craft Project

This simple Vintage Chenille Blanket lampshade craft project is a great way to remake any old lampshade into a new whimsical lampshade perfect for a vintage or retro kitchen, family room, or crafting studio. You can use any old or damage Vintage Chenille Blanket as the base for this Vintage or Retro craft project to save money.

To make a whimsical Vintage Chenille Blanket lampshade you will need:

Vintage Chenille Blanket

Fabric Lamp Shade

Floral wire

Scissors

I find great Vintage Chenille Blankets and new Chenille Blankets all the time at flea markets, antique stores, and even on ebay. I love Vintage Chenille Blankets, but had to finally come up with something to turn them into!

The first step is to completely remove all of the fabric from your damaged or existing lampshade. Start by poking some scissors through the fabric, then cut away. Once you have the body of the fabric removed then start working on the material wrapped onto he wires. This will take some time, but is a great way to save a little money and salvage and exiting lampshade.

Tip: If you don't have a damaged or existing lampshade you want to get rid of you can buy these wire frames of a lampshade at any arts and craft store.

Now, go ahead and wash your Vintage Chenille Blanket. It is always best to start with a clean Vintage Chenille Blanket.

Use your lampshade to trace a pattern onto the blanket. Cut it out about two inches bigger than you lampshade form.

Now, gently wrap the Vintage Chenille Blanket cut out around the lampshade. See how well the Vintage Chenille Blanket will fit on the whimsical lampshade. You only want it to overlap about an inch on the sides.

Now, run a bead of hot glue around the top border of the wire lampshade.

Gently press the top edge of the Vintage Chenille Blanket around it in place. You want the back of the blanket meet in the back, but they can overlap a little if needed.

If your Vintage Chenille Blanket is a little too larger, you can bunch it as you go, sort of like curtains bunch on a rod.

Run the bead of glue and press the bottom of the Vintage Chenille Blanket cutout lampshade into place.