How to Install a Fireplace Mantle
By mike mcgee, published Jun 09, 2006
Published Content: 197 Total Views: 333,176 Favorited By: 2 CPs
Prepare to install the fireplace mantle by attached a brace to the wall. This brace will be used to hold the fireplace mantle in place after it has been completely installed. If you already know the height that you will install the fireplace mantle, use a pencil to mark this spot. The fireplace mantle is most often placed 60 inches from the floor. Measure the length of the wall from the floor up to 60 inches and mark this spot with a pencil.
Use a level to make sure the brace is centered before you install it. Use a drill to pre-drill holes in the wall that are in line with the mortar joints. Once this step is complete you can then install the brace to the wall using 10-inch masonry screws. After you install the brace for the fireplace mantle, if you think that extra support is needed you can install another 2x4 in front of the brace. For this you will need to use 2-1/4 inch wood screws.
Once the brace is in place, you can then begin to install the fireplace mantle. The first piece of the mantle that you should install is the breastplate. Pre-drill the holes that are necessary for the breastplate and then attached the breastplate to the wall. You can use 2-inch masonry screws for this step. The next step is to nail the corners together. The crown of the fireplace mantle should be nailed to the breastplate and the shelf by using 1-inch nails.
You may also like...
- How to Replace a Mantel
- Decorating Your Fireplace for the Holidays
- Using Brick to Accent Your Home
- Fireplace Safety Tips
- DIY Painted Fabric Wall Hanging Craft Project
- How Wall Street Manipulates Investors
- CD Box Wall Art Project
- DIY Fresco Wall Paint Project
- Frigidaire Double Wall Oven Review
- How To Install Spy Sweeper
Takeaways
- Prepare to install the fireplace mantle by attached a brace to the wall
- Use a level to make sure the brace is centered before you install it.
- Use sandpaper or an electric sander to smooth and rough parts on the mantle
Did You Know?
By knowing the steps that are required to install a fireplace, you are improving the chances that of a job well done the first time around. The last thing you want is to have to install the fireplace mantle more than once
Comments
Type in Your Comments Below - (1000 characters left)
Most Commented On

