Turkey Chair Cover Craft Project for Thanksgiving

Scissors and Glue Make This an Easy Fall Craft Project

This is a fun no sew craft project the kids can make to help decorate for Thanksgiving. Scissors are involved, so this may not be perfect for very little kids, but if you are willing to cut out the materials, they certainly could easily assemble their chair slip cover and be part f the fun.

This craft project should cost you less than $5 per chair.

To Make a Thanksgiving Turkey Dining Chair Slip Cover You Will Need:

5 Yards of Felt (white, orange, yellow, brown, and green are all great options)
Lots of square soft felt fabric for cutting designs out of
Fabric Glue
No Sew
Scissors
Tape Measure

To start this simple craft project your need to measure the backs of your dining chairs. You are making a simple square or rectangle to slip over the back, so be accurate with the measurements.

My chairs are 20” wide and 35 inches tall on the back, so that is what I used.

Cut out 2 pieces of felt for this. You will need two pieces of reach chair you are covering. Add three inches on to each side to allow for the no sew or fabric glue.

Lay one piece down. Outline the top and two sides with a thick line of fabric glue. Lay the second piece of felt op to and press it into the fabric glue. Make sure you do not seal the bottom of the two pieces together or you won’t be able to slip it onto the chair.

You will need to let the fabric glue dry completely before moving on to the next step.

Turn the chair cover felt fabric inside out. If you don’t want to wait to do this you have a few options. Sew the fabric with a sewing machine instead of gluing it. You could also use No Sew to sew the three sides. Let this cool a minute and you can turn the fabric out almost immediate. You could also let the kids use yarn on a large needle to sew the sides together. This will occupy them for a while and provide some more color on the slip cover.

Now, use the extra felt fabric to cut out a Thanksgiving turkey design. Let the kids have fun doing this part. To simplify this part have them cut out the turkey body first. Then a neck, then a head. Next, use the yellow felt to cut out feet. Colorful pieces can be used for the tale.

Glue the pieces down on the chair slipcover.