How to Build a Sand Pit
Dont Have a Beach Nearby? Build a Sand Pit
Summer is just around the corner so why not have something fun to do during the great season. If you don't have a beach near you, simply bring the beach to you.
The steps in order to create your very first sand pit are listed below along with all of the proper tools that you will need in order to go through with the whole process of building the sand pit.
Materials needed for this project:
One: You are going to need a shovel to do the digging if you don't have a backhoe or some similar digging device to dig the actual pit where you will be building at.
Two: You are going to need approximately eighteen 2 X4s' equaling out to be an an approximate width of about six feet when put side by side.
Three: You will need roughly 2 lbs. of large head nails to connect your boards together. They will need to be at least 1 1/2 to 2 inches long.
Four: You will need to have eight 4X 4s'. Four of these need to be cut to 8 feet in length for the length of the project and four of these need to be cut to 5 feet in length for the width of the project.
Five: You will need a piece of heavy duty 4 ply or heavier piece of clear or black plastic to cover the sand pit. The piece of plastic needs to be approximately 7 feet in width and 9 feet in length. You can piece two pieces of plastic together if need be.
Six: You will need you will need 8 L brackets in order to connect your 4 X 4s' together.
The first step in oder to make your sand pit is to find a good location around your home that is suitable for your sand pit. You will want to find a surface that is relatively level in all aspects unless if you're just wanting a slope so that your sand is going to be higher in one area than the other but there is really no sense in this.
You may also like...
Takeaways
- How to build a sandpit.
- Bring the beach home.
Comments
Type in Your Comments Below
Most Commented On


