Building a Wood Model Plane

Getting Started

Whether you plan to set your wood model plane to flight at the nearest park or just want to display it in your bedroom, you'll first need to learn the basics of constructing it correctly. You don't want to be the laughing stock among friends when your plane does not fly or it falls apart from shoddy construction. If you are putting it on display instead of flying it, you want it to be in a state worthy of presentation, not to look like it instead belongs in the nearest trash compacter.

Some wood model planes use balsa wood, which is a thin wood that is lightweight enough to glide, but also pliable enough to use for constructing the plane. Wood model planes can also be constructed of other woods, but balsa is the most popular. You can either purchase sheets of wood and design your own plane or you can purchase wood model plane kits. Some kits will come with everything you need, while others will not. Be sure to check the packaging to see what you are getting.

One of the most important materials to have for your wood model plane is a good hobby knife. These can be purchased at craft or hobby stores for under 5 bucks. This is especially important if you will be designing your own wood model plane or if your kit does not come with pre-cut shapes. Also equally important is a good bonding glue. C/A glue and white glue both work well for balsa wood, as well as many other woods. Keep a ruler around for measuring and also for drawing patterns.

It's also good to have a pencil for drawing any pattern lines. A regular #2 pencil is fine. Wax paper is great to put underneath the working area so that the wooden model does not stick to the work surface. If you use plain newspapers, like with other crafts, the balsa wood may accidentally get glued down to the newspaper. With wax paper, this problem can be prevented a little better.